Oil&Gas

Oil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel production * Oil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel production * Oil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel production * Oil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel production

Hospitals Process Plant Renevable Ener Pulp&Paper Building Other Industrial plants * Hospitals Process Plant Renevable Ener Pulp&Paper Building Other Industrial plants * Hospitals Process Plant Renevable Ener Pulp&Paper Building Other Industrial plants * Hospitals Process Plant Renevable Ener Pulp&Paper Building Other Industrial plants

Oil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel production * Oil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel production

Il settore Oil & Gas è sempre in evoluzione ed ogni giorno presenta nuove sfide. Servono quindi sempre più efficienza, tempestività, accuratezza e formazione del personale per rispondere ad una domanda che, sempre di più, è mutevole per la diminuzione delle riserve di prodotto. VAPORUSA da anni fornisce soprattutto il mercato estero di prodotti ed impiantistica legati all’energia come il gas, il petrolio e i diretti derivati, rispettando le norme più rigide e l’ambiente in tutti i processi di lavorazione, dall’estrazione delle materie alle ispezioni e al trasporto e consegna. Agli operatori del settore propone una vasta gamma di prodotti, tecnologie ed attrezzature volte alla soddisfazione e al rispetto degli alti standard di sicurezza. L’approccio aziendale VAPORUSA, che trova fondamento nell’apprendimento e nel continuo aggiornamento, consente di offrire soluzioni innovative negli ambiti del settore OIL & GAS.

Pipe & Fitting

Carbon Steel and Stainless Steel Pipe Type:

Carbon Steel and Stainless Steel Pipe

Standards/Material:

A106 Gr. B, API 5L Gr. B/Gr. X52/X60/X65/ X70, A/SA 333

Size:

from 3/8” to 48“

Classes:

STD, XS, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS

Construction:

Welded and Seamless

Ends:

BW, PE, Threadolet, Galvanized

Forged fittings Type:

Forged fittings

Standards:

ASME B16.11, BS 3799, MSS SP 97, ASME B36.10

Size:

from 1/8″ to 4“

Classes:

3000/6000/9000, STD, XS, SCH. 160, XXS

Construction:

Forged fittings, straight and reduced pipe nipples, reinforced outlets

Material:

A105, A182 (F304/F316/F51/F5/F11/F91/F22), A350 LF2, A420 WPL6, CU–NI 90/10, A694

Ends:

SW, BW, PE, Threadolet NPT/GAS

Butt welding fittings Type:

Butt welding fittings

Standards:

ANSI B16.9, ASME B16.6, welding Bevel according to ANSI B16.25

Size:

from 1/2” to 48“

Classes:

STD, XS, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS

Construction:

Welded or seamless

Material:

ASTM A 234 WPB/WPC/WP1/WP5/WP9/WP11/WP22/ WP91/ WP911, ASTM A 420 WPL6 WPL3, ASTM A 403 WP, 304/304L, 316/316L

Ends:

Accessories

Forged flanges Type:

Forged flanges

Standards:

ISO, EN, BS, ASME, API, NORSOK, AWWA

Size:

from 1/2” to 48”

Classes:

from ANSI 150 to ANSI 2500, API 5000/10000.....

Construction:

Welding neck, Plate, Lapjoint, Threaded, Blind, Socked, Orifice, Reducing, Long welding neck Flanges, Spectacle blind, Spacers/Spade

Material:

Carbon steel, High yield carbon steel, Alloy steel, Duplex/Super Duplex steel, Nickel alloys/Titanium, copper alloys

Ends:

RF, RJ

Stud bolts Type:

Stud bolts

Standards:

ASTM, ASME, AFNOR, BS, DIN, UNI, AD WO – TRD 100 – PED (PRESSURE EQUIPMENT DIRECTIVE 97/23/CE) Size: from 3/8” to 7”

Construction:

Studbolts, Hexagonal Nuts, Anchor Bolts, Screws, Hex Plugs

Material:

Carbon Steels, Low – Medium – High Alloy, Austenitic Stainless Steels, Martensitic Stainless Steels, Duplex – Superduplex Titanium, Monel – Hastelloy–Inconell, Cpper, Berillium

Ends:

imperial and metric

Gaskets Type:

Gaskets

Standards:

ASME B16.20a (ex API STD 601), ANSI B16.21, DIN, BS, AFNOR

Size:

from 1/2” to 1200“

Classes:

rom ANSI 150 to ANSI 2500, from PN6 to PN 250

Construction:

Spiral wound, ring joint, ribbed & flat, aramidic

Material:

stainless steel, PTFE, special steel and alloy, Chlorite minerals, ceramic fibres, graphite, rubber and main types of elastomer

Ends:

FF, RF, RJ

Gate Globe & Check Valves Strainers

Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Power reduced and full bore, strainers Type:

Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Power reduced and full bore, strainers

Standards:

BS 1873, API 600, ASME B16.34 BS 1414, BS 1868, API 6D

Size:

from 2” to 48“

Classes:

from ANSI 150 to ANSI 2500

Construction:

Bolted Bonnet, Cryogenic extended Bonnet, Bellow Seal, Pressure Seal

Material:

carbon steel, stainless steel, alloys, special alloys (e.g.Monel, Inconel®, Hastelloy®, Duplex®, Superduplex®, ...)

Ends:

Flanged ASME B16.5 from 2” to 24“, ASME B16.47 from 26″ to 48“, BW ends to ASME B16.25

Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Power reduced and full bore, strainers Type:

Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Power reduced and full bore, strainers

Standards:

API 602, BS 5352, ISO 15761, ASME B16.11, ASME B1.20.1, ASME B16.25, API 598–BS 6755

Size:

from 1/2” to 2“

Classes:

from ANSI 150 to ANSI 2500

Construction:

OS&Y, ISRS, Y, Angle, Bellows Seal, Cryogenic, Bonnet less, Pressure Seal

Material:

arbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex® ,...)

Ends:

Flanged (Raising or Flat Face), Ring Joint, Socket Weld, Butt Welding

Wafer check valves Type:

Wafer check valves

Standards:

API 594, ANSI B16.34, API 6D

Size:

from 2″ to 36”

Classes:

from ANSI 150 to ANSI 600

Construction:

Tilting Wafer

Material:

carbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,...)

Ends:

2” ~ 24” to ANSI B16.5, 26″ ~ 36″ to MSS-SP-44 or to AP1605/ASME B16.47

Ball, Butterfly & Safety Valves

Ball valve Type:

Ball valve

Standards:

API 6D, API 6A, ASME B. 16.47, ASME B16.34, ASME B16.10, BS 5351

Size:

from 1/2” to 48“

Classes:

from ANSI 150 to ANSI 2500, API 3000 5000/10000 psi

Construction:

Floating, Trunnion Mounted, Three Ways, Double Block & Bleed, Cryogenic

Material:

carbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)

Ends:

RF, RJ, HUB, BW

Butterfly valves Type:

Butterfly valves

Standards:

EN 558 ( DIN 3202 T3 1), ISO 5752 (DIN 3202 T3 K1), API 609, BS 5155, NF E 29-305.1

Size:

from 3/4” to 48″

Classes:

from ANSI 150 to 600

Construction:

Double-eccentric, Soft seated

Material:

Carbon steel, stainless steel, soft iron and special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)

Ends:

ANSI B16.5, MSS SP-44, API 605/ASME B16.47, JIS

Safety valves Type:

Safety valves

Standards:

API 520/526/527, ISO 4126-1, ASME VIII D.1, ASME 16.34

Size:

from 1/2” to 10″

Classes:

from ANSI 150 to ANSI 2500

Construction:

Angular type, full nozzle, spring loaded, conventional or balanced

Material:

Carbon steel, stainless steel and special alloys

Ends:

Inlet 150 to 2500