The oil and gas industry is always changing and each day brings new challenges.
Therefore, more and more efficiency, timeliness, accuracy and staff training are needed to respond to a demand that is increasingly changing due to the decrease in product reserves.
For years VAPORUSA has been supplying the foreign market with energy-related products and systems such as gas, oil and direct derivatives, respecting the strictest standards and the environment in all manufacturing processes, from the extraction of materials to inspections and to transport and delivery. It offers a wide range of products, technologies and equipment to the operators of the sector, always with the aim to satisfy and respect high safety standards.
The VAPORUSA business approach, which is based on learning and constant updating, allows us to offer innovative solutions in the OIL & GAS sector.
[contact-form-7 id="21950" title="Oil and Gas"]Pipe & Fitting
Carbon Steel and Stainless Steel Pipe
Standards/Material:A106 Gr. B, API 5L Gr. B/Gr. X52/X60/X65/ X70, A/SA 333
Size:from 3/8” to 48“
Classes:STD, XS, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS
Construction:Welded and Seamless
Ends:BW, PE, Threadolet, Galvanized
Forged fittings
Standards:ASME B16.11, BS 3799, MSS SP 97, ASME B36.10
Size:from 1/8″ to 4“
Classes:3000/6000/9000, STD, XS, SCH. 160, XXS
Construction:Forged fittings, straight and reduced pipe nipples, reinforced outlets
Material:A105, A182 (F304/F316/F51/F5/F11/F91/F22), A350 LF2, A420 WPL6, CU–NI 90/10, A694
Ends:SW, BW, PE, Threadolet NPT/GAS
Butt welding fittings
Standards:ANSI B16.9, ASME B16.6, welding Bevel according to ANSI B16.25
Size:from 1/2” to 48“
Classes:STD, XS, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXS
Construction:Welded or seamless
Material:ASTM A 234 WPB/WPC/WP1/WP5/WP9/WP11/WP22/ WP91/ WP911, ASTM A 420 WPL6 WPL3, ASTM A 403 WP, 304/304L, 316/316L
Ends:BW
Accessories
Forged flanges
Standards:ISO, EN, BS, ASME, API, NORSOK, AWWA
Size:from 1/2” to 48”
Classes:from ANSI 150 to ANSI 2500, API 5000/10000.....
Construction:Welding neck, Plate, Lapjoint, Threaded, Blind, Socked, Orifice, Reducing, Long welding neck Flanges, Spectacle blind, Spacers/Spade
Material:Carbon steel, High yield carbon steel, Alloy steel, Duplex/Super Duplex steel, Nickel alloys/Titanium, copper alloys
Ends:RF, RJ
Stud bolts
Standards:ASTM, ASME, AFNOR, BS, DIN, UNI, AD WO – TRD 100 – PED (PRESSURE EQUIPMENT DIRECTIVE 97/23/CE) Size: from 3/8” to 7”
Construction:Studbolts, Hexagonal Nuts, Anchor Bolts, Screws, Hex Plugs
Material:Carbon Steels, Low – Medium – High Alloy, Austenitic Stainless Steels, Martensitic Stainless Steels, Duplex – Superduplex Titanium, Monel – Hastelloy–Inconell, Cpper, Berillium
Ends:imperial and metric
Gaskets
Standards:ASME B16.20a (ex API STD 601), ANSI B16.21, DIN, BS, AFNOR
Size:from 1/2” to 1200“
Classes:rom ANSI 150 to ANSI 2500, from PN6 to PN 250
Construction:Spiral wound, ring joint, ribbed & flat, aramidic
Material:stainless steel, PTFE, special steel and alloy, Chlorite minerals, ceramic fibres, graphite, rubber and main types of elastomer
Ends:FF, RF, RJ
Gate Globe & Check Valves Strainers
Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Power reduced and full bore, strainers
Standards:BS 1873, API 600, ASME B16.34 BS 1414, BS 1868, API 6D
Size:from 2” to 48“
Classes:from ANSI 150 to ANSI 2500
Construction:Bolted Bonnet, Cryogenic extended Bonnet, Bellow Seal, Pressure Seal
Material:carbon steel, stainless steel, alloys, special alloys (e.g.Monel, Inconel®, Hastelloy®, Duplex®, Superduplex®, ...)
Ends:Flanged ASME B16.5 from 2” to 24“, ASME B16.47 from 26″ to 48“, BW ends to ASME B16.25
Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Power reduced and full bore, strainers
Standards:API 602, BS 5352, ISO 15761, ASME B16.11, ASME B1.20.1, ASME B16.25, API 598–BS 6755
Size:from 1/2” to 2“
Classes:from ANSI 150 to ANSI 2500
Construction:OS&Y, ISRS, Y, Angle, Bellows Seal, Cryogenic, Bonnet less, Pressure Seal
Material:arbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex® ,...)
Ends:Flanged (Raising or Flat Face), Ring Joint, Socket Weld, Butt Welding
Wafer check valves
Standards:API 594, ANSI B16.34, API 6D
Size:from 2″ to 36”
Classes:from ANSI 150 to ANSI 600
Construction:Tilting Wafer
Material:carbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,...)
Ends:2” ~ 24” to ANSI B16.5, 26″ ~ 36″ to MSS-SP-44 or to AP1605/ASME B16.47
Ball, Butterfly & Safety Valves
Ball valve
Standards:API 6D, API 6A, ASME B. 16.47, ASME B16.34, ASME B16.10, BS 5351
Size:from 1/2” to 48“
Classes:from ANSI 150 to ANSI 2500, API 3000 5000/10000 psi
Construction:Floating, Trunnion Mounted, Three Ways, Double Block & Bleed, Cryogenic
Material:carbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)
Ends:RF, RJ, HUB, BW
Butterfly valves
Standards:EN 558 ( DIN 3202 T3 1), ISO 5752 (DIN 3202 T3 K1), API 609, BS 5155, NF E 29-305.1
Size:from 3/4” to 48″
Classes:from ANSI 150 to 600
Construction:Double-eccentric, Soft seated
Material:Carbon steel, stainless steel, soft iron and special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)
Ends:ANSI B16.5, MSS SP-44, API 605/ASME B16.47, JIS
Safety valves
Standards:API 520/526/527, ISO 4126-1, ASME VIII D.1, ASME 16.34
Size:from 1/2” to 10″
Classes:from ANSI 150 to ANSI 2500
Construction:Angular type, full nozzle, spring loaded, conventional or balanced
Material:Carbon steel, stainless steel and special alloys
Ends:Inlet 150 to 2500